The FlexCNC drills, mills, taps, and bevels large parts in one setup. Available in CT or BT 40 with a max
torque capability of 125 ft/lbs.
The C-Series features a mono‐block, welded steel frame with high rigidity and a T‐slot machine bed. The machine is moved along oversized precision linear guideways.
The moving parts are self-lubricating on all axes and the machine’s spindle is driven by a programmable
servo-motor. Including X-axis with helical rack and oversized ball screw on Y & Z-axis.
Mill | Drill | Tap | Bevel | Chamfer | Helical Mill | Bore
The C-Series FlexCNC is available in several models. The standard configuration operates with an 18 HP motor and a 6000 RPM spindle.
- Bed Frame with Chip Conveyor
- T-slotted Table
- Delta Tau Controls
- 22” Touch Screen Monitor
- 10-Station Automatic Tool Changer
- Mobile control panel
- Flood Coolant
- 18 HP Motor
- Through Spindle Coolant 4 bar
- CT40 Spindle
- Tool Calibrator
- LED Machine Light
- RJ45 Ethernet Connection
- Keyboard + Mouse
- Leveling Blocks
- Laser Scanner Barrier on Front & Light Curtain on Rear.
Additional Accessories Available
- Z-Reader Probe (measuring height of workpiece)
- Renishaw Probe + Software, auto zero-point setting
- External Micro Spray
- External Paste Spray (flow drilling)
- External Oil Spray (form tapping)
- External Air Blast
- 4th Axis with 10″ Platter
- Through Spindle Air Blast
- Universal Pneumatic Clamp
Special Engineered Requests
- Machine Beds > 35′
- Took Break Detector
- Lower Machine Bed
- Special 4th Axis
- Magnetic Scales
- Air-Conditioned Panels
- 12,000 RPM Spindle
- Special Tool Holders
Control & Hand Pendant
Special Engineered Request
The control on the FlexCNC is designed to emulate the Fanuc 31i, with ISO G & M-code programming for dynamic 3 axis machining along with an optional 4th axis. Indefinite read ahead capability which allows the machine to flawlessly and smoothly machine 3D tool paths as well as smooth helix and ramping tool
Equipped with a color 22” touchscreen control, 40 GB of program storage and programmable zero-points. Load programs with a USB or through an ethernet connection.
The AMI5000 Remote Pendant is used as a Human Machine Interface (HMI). It uses EtherCAT communications technologies to interface with ANCA Motion Control System Software, allowing fast and flexible access for real-time control.
|Model||C Series 10-02||C-Series 15-02||C-Series 20-02||C-Series 25-02||C-Series 30-02||C-Series 35-02|
|Length of Table|
|Width of Table|
Supplied by Customer
Ethernet connection (RJ 45) near the machine. This allows FlexCNC to log in for:
– checking/modifying machine programs
– analyze eventual technical problems (limit-switches, drivers etc.)
– load software-updates
*Without this connection FlexCNC will not supply remote support and eventual traveling costs of technicians will be invoiced.