fbpx

High-Speed End Milling on the FlexCNC

June 11, 2019

3/4″ depth of cut, 90 IPM, 4000 RPM.

A 3/4″ Kennametal MaxiMet was used for end milling on the FlexCNC. We did this time analysis for a customer and were able to take the machining time from 10 1/2 minutes to 1 minute, 50 seconds.

https://www.youtube.com/watch?v=SWMBMDn6DZ8

Leave a Reply

Your email address will not be published. Required fields are marked *